Logo Fluxron
future inside

ET Adapter Power Reduction

Power: 3.5 kW, 5 kW, 8 kW

With the ET adapter power reduction, the setpoints of the Hall gag can be lowered by one third for energy optimization or power reduction on the ET thermostat. The control signals (5VDC) are connected via the 4-pin OPT interface either to DIN 18875 to an energy optimization system or to an additional switching contact (bridge) for manual operation.

As long as the signals b and c are connected to each other at the 4-pin OPT interface, the set point does not reduce.

Product sheet
Brief instructions

Category:

Related products

We are happy to advise you.

Pasquale Zaccaria

Commercial Applications

+41 71 511 38 85
pasquale.zaccaria@fluxron.com

FLUXRON Solutions AG
Amriswilerstrasse 82
CH-8589 Sitterdorf

info@fluxron.com

CH: +41 (0)71 511 38 80
DE: +49 (0)945 36 599 579
AT: +43 (0)720 515 088

Search
Youtube Linkedin Google
© 2023 All rights reserved

Die X-Klasse Induktion ist für den professionellen Einsatz mit den üblichen Standard Funktionen ausgestattet. Diese lassen sich mittels der FLUXRON APP über Bluetooth einfach auf Kundenbedürfnisse anpassen.

Die S-Klasse Induktion garantiert die höchste Funktionalität, Doppelseitige Bedienung, Energiemanagement, Leistungsoptimierung und vieles mehr. Alle Funktionen können ebenfalls wie bei der X-Klasse über Bluetooth konfiguriert werden.

Die I-Klasse Induktion ist für eine abgesetzte Generatorinstallation optimal. Alle Signale der Kochzone werden in einem Interface gesammelt und über eine Datenleitung zum entfernten Generator digital übermittelt, was die Installation sehr vereinfacht.

The X-Class induction is equipped with the usual standard functions for professional use. These can be easily adapted to customer needs using the FLUXRON APP via Bluetooth.

The S-Class induction guarantees maximum functionality, double-sided operation, energy management, performance optimisation and much more. All functions can also be configured via Bluetooth, as with the X-Class.

The I-Class induction is ideal for remote generator installation. All signals from the cooking zone are collected in an interface and transmitted digitally via a data line to the remote generator, which greatly simplifies installation.

Depending on the requirements, the following CERAN glass dimensions are supported:



Single cooking zone:

  • Standard: 325mm x 325mm / 360mm x 360mm / 388mm x 388mm / 430mm x 430mm


Double cooking zone:

  • Standard: 530mm x 325mm / 580mm x 360mm / 650mm x 325mm / 720mm x 360mm / 776mm x 388mm
  • Special: 652mm x 356mm / 670mm x 370mm / 788mm x 388mm


Four times cooking zone:

  • Standard: 650mm x 650mm / 720mm x 720mm / 776mm x 776mm
  • Special: 740mm x 840mm / 780mm x 780mm

Six times cooking zone:

  • Standard: 975mm x 650mm
  • Special: 1000mm x 800mm


Special glasses:

  • slider: 430mm x 360mm / 560mm x 360mm
  • powershift: 300mm x 210mm / 388mm x 290mm
  • inline: 788mm x 230mm


WOK Cuvettes:

  • standard: 311mm / 400mm
  • special: 500mm

light – in lightweight construction
No assembly aids are provided by the manufacturer. To attach the coil module, mounting clips are mounted and screwed to the threaded bolts that are available on the building side.

lift – with lifting system
Using a patented lifting system, the coils can be pushed up to the CERAN glass after the device has been installed and pressed via the integrated spring system.

flex – the standard
The coils are mounted on the additional coil carrier. The coil carrier itself supports various types of assembly, which can be used on the construction side.

frame – with mounting frame
The coil carriers can be mounted on the existing bolt system on the additional glass carrier. The glass carrier itself is mounted sideways or from the bottom to the stove surface adjustable in height.

slide – with rail mounting frame
Thanks to the additional rails attached to the glass carrier, the coil carriers can be inserted from the front over the aperture without any effort

BAX Generators are specially designed for installation directly under the hob . The drip water safe housing with air intake via grease filter from below.

REX Generators are specially designed for installation in electrical cabinets . They can be arranged directly next to each other and are available as a single generator as well as a double generator.

BOX Generators are specially designed for installation in tabletop units . Thanks to the open, elongated design and the radial ventilation system, they have a very small height.

NOX Generators are specially designed for holding systems . The small height limits the performance to 3500W.

Modular induction systems (-out)

Fit-out devices are modular induction hobs. The CERAN glass and the glass carrier are flush to the stove surface via adjusting screws. The coil system itself is simply used in the glass carrier. However, the induction generator is installed separately in a generator compartment or remotely in the adjoining room.

Built-out devices are modular induction solutions whose coils are installed directly under a CERAN glass. Depending on the application, different mounting methods are available for the coil systems. The induction generator itself is installed separately in a generator compartment or set off in the adjoining room.

Drop-out devices are also modular induction cookers. The visible glass frame with the CERAN glass is inserted from above into existing recesses and stands up slightly on the stove surface. The coil system itself is simply fixed in the glass frame. However, the induction generator is installed separately in a generator compartment or remotely in the adjoining room.

Compact induction systems (-in)

Fit-in devices are compact induction solutions. The CERAN glass and the glass carrier are flush to the stove surface via adjusting screws. The induction or coil system itself is easily used with the glass carrier.

Built-in devices are compact induction solutions that are installed directly under the CERAN glass. Depending on the application, different housing and assembly technology is used.

Drop-in devices are inserted into a recess from above. The visible glass frame stands up slightly on the stove surface. The induction unit is either firmly installed in the housing, can be used from below or can be retracted from the front.

Mobile induction systems (-top)

Table-top devices are ideal for mobile use. They are connected directly to a power outlet and are immediately ready for operation.