The induction systems Fit-in BAX are compact hobs which can be installed flush with the cooker surface. The CERAN glass rests on the glass support and can be adjusted exactly to the installation height. The cooling air is supplied from below via grease filter and air hose. With the Fit-in BAX, the mounting types “frame” or “slide” are available.
Depending on the requirements, the following CERAN glass dimensions are supported:
Single cooking zone:
Double cooking zone:
Four times cooking zone:
Six times cooking zone:
Modular induction systems (-out)
Fit-out devices are modular induction cookers. The CERAN glass and the glass carrier are flush to the stove surface via adjusting screws. The coil system itself is simply used in the glass carrier. However, the induction generator is installed separately in a generator compartment or remotely in the adjoining room.
Built-out substructure devices are modular induction solutionswhose coils are installed directly under a CERAN glass. Depending on the application, different mounting methods are available for the coil systems. The induction generator itself is installed separately in a generator compartment or set off in the adjoining room.
Drop-out insert devices are also modular induction cookers. The visible glass frame with the CERAN glass is inserted from above into existing recesses and stands up slightly on the stove surface. The coil system itself is simply fixed in the glass frame. However, the induction generator is installed separately in a generator compartment or remotely in the adjoining room.
Compact induction systems (-in)
Fit-in devices are compact induction solutions. The CERAN glass and the glass carrier are flushed to the stove surface via adjusting screws. The induction or coil system itself is easily used with the glass carrier.
Built-in devices are compact induction solutions that are installed directly under the CERAN glass. Depending on the application, different housing and assembly technology is used.
Drop-in devicesare inserted into a recess from above. The visible glass frame stands up slightly on the stove surface. The induction unit is either firmly installed in the housing, can be used from below or can be retracted from the front.
Mobile induction systems (-top)
Table-top devices are ideal for mobile use. They are connected directly to a power outlet and are immediately ready for operation.
BAX generators are specially designed for installation directly under the hob. The drip water safe housing with air intake via fat filter from below.
REX generators are specially designed for installation in the electrical cabinet. They can be arranged directly next to each other and are available as a single generator as well as a double generator.
BOX generators are specially designed for installation in tableware. Thanks to the open, elongated design and the radial ventilation system, they have a very small height.
NOX generators are specially designed for warming systems. The small height limits the performance to 3500W.
light – in lightweight construction
Herstellerseitig sind keine Montagehilfen vorgesehen
module – with mounting clips
To attach the coil module, mounting clips are mounted and screwed to the threaded bolts that are available on the building side.
lift – with lifting system
Using a patented lifting system, the coils can be pushed up to the CERAN glass after the device has been installed and pressed via the integrated spring system.
flex – the standard
The coils are mounted on the additional coil carrier. The coil carrier itself supports various types of assembly, which can be used on the construction side.
frame – with mounting frame
The coil carriers can be mounted on the existing bolt system on the additional glass carrier. The glass carrier itself is mounted sideways or from the bottom to the stove surface adjustable in height.
slide – with rail frame
Thanks to the additional rails attached to the glass carrier, the coil carriers can be inserted from the front over the aperture without any effort
The S-Class induction is suitable for both single and multi-cooking zones up to 8kW, guaranteeing the highest functionality, which can be easily configured via Bluetooth.
TheC-Class induction is designed for single cookers up to 5kW. The typical functions can also be configured via Bluetooth, as with the S-Class.
The A-Class induction is also available like the C-Class for single cookers up to 5kW, but has no configuration option.