future inside

Contact
FLUXRON Solutions AG
Amriswilerstrasse 82
8589 Sitterdorf
Switzerland

Persons entitled to represent
Benno Jäckle

Disclaimer
The author reserves the right not to be responsible for the topicality, correctness, completeness or quality of the information provided.
Liability claims against the author for damages of a material or immaterial nature resulting from the access or use or non-use of the published information, due to misuse of the connection or due to technical faults, Excluded.

All offers are non-binding. The author expressly reserves the right to change, supplement or delete parts of the pages or the entire offer without prior notice or to discontinue publication temporarily or permanently.


Liability for links
References and links to third-party websites are outside our area of responsibility. Any responsibility for such websites is denied. Access and use of such websites are at the user’s own risk.

Copyright

The copyright and all other rights to content, images, photos or other files on the website belong exclusively to FLUXRON Solutions AG or the specifically named holders of rights. For the reproduction of any elements, the written consent of the copyright holders must be obtained in advance.


Privacy
Based on Article 13 of the Swiss Federal Constitution and the data protection regulations of the Federal Republic of Germany (Data Protection Act, DSG), every person is entitled to protection of his privacy as well as to protection against misuse of his/her personal data. We comply with these provisions. Personal data will be kept strictly confidential and will not be sold or passed on to third parties.
In close cooperation with our hosting providers, we strive to protect the databases as much as possible from third-party access, loss, misuse or counterfeiting.
When accessing our websites, the following data is stored in log files: IP address, date, time, browser request and general. transmitted information about the operating system or Browser. This usage data forms the basis for statistical, anonymous evaluations, so that trends can be identified, on the basis of which we can improve our offers accordingly.

Depending on the requirements, the following CERAN glass dimensions are supported:

Single cooking zone:

  • standard:     325mm x 325mm /   360mm x 360mm /   388mm x 388mm / 430mm x 430mm

Double cooking zone:

  • standard:       530mm x 325mm / 580mm x 360mm
    650mm x 325mm / 720mm x 360mm / 776mm x 388mm
  • special:           652mm x 356mm / 670mm x 370mm / 788mm x 388mm

Four times cooking zone:

  • standard:       650mm x 650mm / 720mm x 720mm / 776mm x 776mm
  • special:           740mm x 840mm / 780mm x 780mm

Six times cooking zone:

  • standard:       975mm x 650mm
  • special:           1000mm x 800mm

Special glasses:

  • slider:             430mm x 360mm / 560mm x 360mm
  • powershift:     300mm x 210mm / 388mm x 290mm
  • inline:             788mm x 230mm

WOK Cuvettes:

  • standard:       311mm / 400mm
  • special:           500mm


Modular induction systems (-out)

Fit-out devices are modular induction cookers. The CERAN glass and the glass carrier are flush to the stove surface via adjusting screws. The coil system itself is simply used in the glass carrier. However, the induction generator is installed separately in a generator compartment or remotely in the adjoining room.

Built-out substructure devices are modular induction solutionswhose coils are installed directly under a CERAN glass. Depending on the application, different mounting methods are available for the coil systems. The induction generator itself is installed separately in a generator compartment or set off in the adjoining room.

Drop-out insert devices are also modular induction cookers. The visible glass frame with the CERAN glass is inserted from above into existing recesses and stands up slightly on the stove surface. The coil system itself is simply fixed in the glass frame. However, the induction generator is installed separately in a generator compartment or remotely in the adjoining room.


Compact induction systems (-in)

Fit-in devices are compact induction solutions. The CERAN glass and the glass carrier are flushed to the stove surface via adjusting screws. The induction or coil system itself is easily used with the glass carrier.

Built-in devices are compact induction solutions that are installed directly under the CERAN glass. Depending on the application, different housing and assembly technology is used.

Drop-in devicesare inserted into a recess from above. The visible glass frame stands up slightly on the stove surface. The induction unit is either firmly installed in the housing, can be used from below or can be retracted from the front.


Mobile induction systems (-top)

Table-top devices are ideal for mobile use. They are connected directly to a power outlet and are immediately ready for operation.

BAX generators are specially designed for installation directly under the hob. The drip water safe housing with air intake via fat filter from below.

REX generators are specially designed for installation in the electrical cabinet. They can be arranged directly next to each other and are available as a single generator as well as a double generator.

BOX generators are specially designed for installation in tableware. Thanks to the open, elongated design and the radial ventilation system, they have a very small height.

NOX generators are specially designed for warming systems. The small height limits the performance to 3500W.

light – in lightweight construction
Herstellerseitig sind keine Montagehilfen vorgesehen

module – with mounting clips
To attach the coil module, mounting clips are mounted and screwed to the threaded bolts that are available on the building side.

lift – with lifting system
Using a patented lifting system, the coils can be pushed up to the CERAN glass after the device has been installed and pressed via the integrated spring system.

flex – the standard
The coils are mounted on the additional coil carrier. The coil carrier itself supports various types of assembly, which can be used on the construction side.

frame – with mounting frame
The coil carriers can be mounted on the existing bolt system on the additional glass carrier. The glass carrier itself is mounted sideways or from the bottom to the stove surface adjustable in height.

slide – with rail frame
Thanks to the additional rails attached to the glass carrier, the coil carriers can be inserted from the front over the aperture without any effort

The S-Class induction is suitable for both single and multi-cooking zones up to 8kW, guaranteeing the highest functionality, which can be easily configured via Bluetooth.

TheC-Class induction is designed for single cookers up to 5kW. The typical functions can also be configured via Bluetooth, as with the S-Class.

The A-Class induction is also available like the C-Class for single cookers up to 5kW, but has no configuration option.